Los Angeles United States
Member #75,408
June 2, 2009
592 Posts
Offline
Quote: Originally posted by RL-RANDOMLOGIC on Dec 10, 2018
Here is a visual aid to help understand the base-4 system. As I said the Hybrid is a shortened version
of my Rogue program that only uses 3 rogue values, 1, 3 & 5. These were selected because they seem
to give the most consistent patterns game to game. The fifth box got covered up and is not shown in
the pic below but I think the information is self evident for that step of the process. I built a algorithm that
can run/calculated 10K calculations per second regardless of the number of values set. If any patterns are
missing in the R-click dump file then I would like to know. Be assured that the run process does catch every
possible straight. The reason that a few codes do not produce a full 16 lines is because some codes go beyond
999 which is the cut-off for the line generator.
RL
RL,
I wanted to make a suggestion maybe It will help to reduce the choice of selections.
We have to make 1 selection out of 4 ( 0,1,2,3 ) for each Hybrid number (3) which is 3 selection out of 12 ( Rogue system numbering ) and the
numbers groups are organised in numerical order.
My idea is :
What about organising the 4 Rogue groups number in ODD and EVEN , for example the Rogue groups are 0,1,2,3 Like the illustration in your post above.
Rogue groups 0 and 1 would have all the sets that are EVEN and Rogue groups 2 and 3 the ODD.
Rogue group 0 = EVEN ( 1024/4=256 )
Rogue group 1 = EVEN ( 1024/4=256 )
Rogue group 2 = ODD ( 1024/4=256 )
Rogue group 3 = ODD ( 1024/4=256 )
So at the very beginning, we would have to decide if the Hybrid number will be an ODD or EVEN which will reduce the selection to 2 instead of 4 for each 3
groups position ( I hope what Im saying makes sense ? )
And can also separated into further like,
Rogue group 0 = EVEN / HIGH
Rogue group 1 = EVEN / LOW
Rogue group 2 = ODD / HIGH
Rogue group 3 = ODD / LOW
Which now I believe will leave the selection to 1, but Im not sure of it, it's just an idea, you'll be the judge ?
United States
Member #59,352
March 13, 2008
5,626 Posts
Offline
Quote: Originally posted by frenchie on Dec 15, 2018
RL,
I wanted to make a suggestion maybe It will help to reduce the choice of selections.
We have to make 1 selection out of 4 ( 0,1,2,3 ) for each Hybrid number (3) which is 3 selection out of 12 ( Rogue system numbering ) and the
numbers groups are organised in numerical order.
My idea is :
What about organising the 4 Rogue groups number in ODD and EVEN , for example the Rogue groups are 0,1,2,3 Like the illustration in your post above.
Rogue groups 0 and 1 would have all the sets that are EVEN and Rogue groups 2 and 3 the ODD.
Rogue group 0 = EVEN ( 1024/4=256 )
Rogue group 1 = EVEN ( 1024/4=256 )
Rogue group 2 = ODD ( 1024/4=256 )
Rogue group 3 = ODD ( 1024/4=256 )
So at the very beginning, we would have to decide if the Hybrid number will be an ODD or EVEN which will reduce the selection to 2 instead of 4 for each 3
groups position ( I hope what Im saying makes sense ? )
And can also separated into further like,
Rogue group 0 = EVEN / HIGH
Rogue group 1 = EVEN / LOW
Rogue group 2 = ODD / HIGH
Rogue group 3 = ODD / LOW
Which now I believe will leave the selection to 1, but Im not sure of it, it's just an idea, you'll be the judge ?
frenchie
If you look at the last picture I posted you will see hi/low and odd/even options.
I also added repeat digit tracking and mirror digits to the mix. Given that we are
working with digits 0-1-2-3 the repeat and mirror will at times reduce the choices
to one. There are many options in the H-code tool where if combined with another
it will reduce to a single value.
I thought I might have time to finish it today but the wife had other plans for me.
Check back Monday evening as it should be ready by then.
MA United States
Member #171,823
January 12, 2016
255 Posts
Offline
Hopefully I can get sometime tomorrow for some testing I did last weekend do some back testing and it took me a while trying to figure out which code had the winning numbers. Quick question is it being updated for pick4 too seem s not people are using it for pick3